Table of Contents
Advertisement
FS-2/2E FUNCTIONS
Syncro Slave
The FS-2E and the FS-2 (with the 2.0 upgrade), has
two settings in Syncro Slave:
NEW FILE - When using this setting
(the default), and the FS-2E is
triggered to stop recording from the
camcorder, the current file is closed
and a new file is opened ready for the
next recording.
SAME FILE - This option appends the
new recording onto the same file. This
significantly cuts down on the number
of files created and is ideal for many
applications.
In SYNCRO SLAVE mode, a camcorder and the
FS-2/2E share the same record function and the
FS-2/2E is slaved to the camcorder. Once it is set
and you exit the CONTROL MENU, they return to
the default menu screen. The FS-2/2E also
immediately enters REC PAUSE mode and a "Y"
appears next to the record symbol on the FS-2/2E
interface.
All recording is controlled by the camcorder
exclusively. Every time you press the camcorder's
REC button, the FS-2/2E goes into the selected
RECORD MODE. Each time you start recording on
your camcorder, a new track is created on disk.
When used with RETRO DISK or RETRO CACHE
functions, as soon as SYNCRO SLAVE is set, the
camcorder begins filling up the selected retro
record buffer. Press the REC button on the
camcorder and the contents of the retro buffer are
appended to the start of your clip.
The FS-2/2E buttons (other than MENU) are locked
out when in this mode. It is also not possible to use
the optional FS-2/2E remote control units. You must
exit SYNCRO SLAVE by entering the CONTROL
MENU by pressing the MENU button when on the
FS-2/2E main menu. If the camcorder is set to VTR
mode, the FS-2/2E's control panel becomes active
in order to allow playback.
If a tape ends while using SYNCRO SLAVE mode,
the FS-2/2E continues to record.
2 - 14
At this point, to STOP a recording, push the FS-2/
2E STOP button twice.
Play Mode Menu
PLAY CLIP
LOOP CLIP
LOOP ALL
PLAY ALL
EXIT
Play Clip
For this function, the FS-2/2E plays the selected clip
from start to finish when you press the PLAY button.
At the end of the selected clip, the FS-2/2E pauses.
Loop Clip
For this function, the FS-2/2E plays the selected clip
from start to finish. Immediately after completing the
clip, the FS-2/2E begins playing the clip again
without a pause. It plays this clip until stopped.
Loop All
For this function, the FS-2/2E plays the entire
contents of the disk (all clips) in order from start to
finish. At the end of the last clip, the FS-2/2E begins
to play from the beginning of the first clip again
without a pause. It plays these clips until stopped.
Play All
For this function, the FS-2/2E plays the entire
contents of the disk (all clips) in order from start to
finish. At the end of the last clip, the FS-2/2E
pauses.
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
Part Number: MANL-0927-03
Select the mode. The highlighted
mode is the current mode after exit.
Press EXIT to return to the menu
screen. The default mode is PLAY
CLIP.
Advertisement
Table of Contents
