Syncro Slave - Focus FS-C User Manual

Quickstart

Syncro Slave

This mode is for camcorders that do not have external
control or the tapeless control functionality compatible
with the FS-C.
• Syncro Slave mode requires that a tape be in the
camcorder for operation.
• The FS-C must be set to
• In this mode, the FS-C watches the record state of the
camcorder and follows its actions.
When Synchro Slave mode is entered from the menu, the
Home screen appears with the Pause indicator displayed in
the upper left-hand corner along with a
the FS-C is following the camcorder's record state.
1. Verify that the FS-C is in
2. From the FS-C Home screen, press the
button several times until the
3. Use the
dash on the left side of an item indicates it is the current
selection. The default value is
4. Press the
5. The beginning screen returns and a
appears in the upper left-hand corner. Next to this symbol,
is a
Y
of the connected camcorder.
6. Now the FS-C will record at the same time the camcorder
records to tape.
32
CONTROL
LOCAL

-SYNCRO SLAVE

AV / C
TAPELESS
navigation button to select
Down
navigation button.
Select
indicating that FS-C is now following the record state
control mode.
Syncro Slave
that indicates that
Y
mode.
STOP
Right
CONTROL
.
Local
Pause
FS-C Portable DTE Recorder
navigation
screen appears:
. The
Syncro Slave
indicator