Unpacking - NEC SuperScript 1800 User Manual
Hide thumbs
Also See for SuperScript 1800:
- Instructions (5 pages) ,
- Network user's manual (82 pages) ,
- Quick start manual (8 pages)
Table of Contents
Advertisement
U
NPACKING
Follow these steps to safely unpack the printer.
1.
Open the top cover of the packing box and remove the
Accessory Kit, QuickStart Guide, Toner Cartridge, and
Power Cord (A).
2.
Carefully lift the printer out of the box. Use the hand
grips on both sides of the printer (B).
Unpacking the Printer
A
C
6
SuperScript 1800 — User's Guide
3.
Make sure all items are included in your box (see the list
on the next page).
4.
Remove any packing tape from the printer.
5.
Remove the 500-sheet Cassette from the printer (C) and
remove the packing material from inside (D).
6. Insert the tray into the printer (E).
Hand Grip
note:
Do not discard the box and
packing material.
D
B
The back of the printer should
be facing you when you lift it!
This printer weighs about
36 lbs.
E
Advertisement
Table of Contents
