NEC SuperScript 1800 User Manual page 107

Message Required Action
This occurs when paper of a different
size than what is specified is loaded in
the tray. Load correct paper size in
Tray (N) (where N is Tray 1, 2 or 3) in
order for the current print job to
continue.
In the case of Tray 2 or Tray 3, if the
tray does not support the specified
paper size, the default paper size
(Letter) will be displayed for (P).
Tray 1 (Multipurpose Tray) is empty
and must be filled with the specified
paper (P).
This occurs when TRAY1–M is
specified as the SOURCE parameter
in the Printing Menu or TRAY1–M is
specified in the print job but Tray 1 is
empty.
This occurs when Tray 1 is selected as
the input device and TRAY1–M is
defined as the SOURCE parameter in
the Printing Menu or TRAY1–M is
specified in the print job.
Load specified paper into Tray 1.
The Output Bin (Output Tray) is full.
Remove paper from the tray.
Message Required Action
Tray (N) has been removed (where N
is Tray 2 or 3). Insert correct tray.
The wrong toner cartridge has been
placed in the printer. Replace with an
NEC SuperScript 1800 Toner
Cartridge.
The printer received more data than
can fit in its available memory.
Reduce the size of the print job or
upgrade memory.
The data (dense text, rules, raster or
vector graphics) sent to the printer
was too complex. If this occurs, the
printer will automatically try to re-
render the data. If this message
persists you may need to simplify the
print job or install additional memory.
If using a serial connection, this
occurs when the printer encounters
an error while transferring data to the
computer. The printer's baud rate or
parity may not be the same as that of
the computer.
You can find the serial baud rate by
accessing the I/O Menu. See Chapter
5 "Operator Panel."
Operator Panel Messages 101