Paper Jams In 500-Sheet Cassette Area - NEC SuperScript 1800 User Manual
Hide thumbs
Also See for SuperScript 1800:
- Instructions (5 pages) ,
- Network user's manual (82 pages) ,
- Quick start manual (8 pages)
Table of Contents
Advertisement
Paper Jams in 500-sheet Cassette Area
Follow these directions to clear input paper jams that occur in
the 500-sheet Cassette (Tray 2) area.When this happens the
Operator Panel will display
1.
Slowly remove the cassette tray then remove any
damaged paper from the tray (A).
2.
If a paper edge is visible in the feed area, use both hands
to gently pull the paper down and out of the printer (B).
A
D
.
JAM-TRAY
3.
Reload paper into the cassette tray (C).
Make sure the paper stack is below the metal corner tab
in the tray .
4.
Slide the Cassette Tray back into the printer (D).
5. Open the Top Cover (E).
6. Close the Top Cover to clear the jam message (F).
B
E
C
F
Paper Jam Problems
95
Advertisement
Table of Contents
Need help?
Do you have a question about the SuperScript 1800 and is the answer not in the manual?