Unpacking; Identifying The Printer Parts; Connecting Your Printer - NEC SuperScript 750C User Manual

Hide thumbs Also See for SuperScript 750C:
Table of Contents

Advertisement

Quick Start
This section is a rapid guide for installing your printer and
preparing it for use. It contains a sequence of operations
which should be performed in the order described .
More detailed information about the printer features and
functions is given in the User Guide.

Unpacking

Keep the carton and all the packing materials in case
you have to repack or ship the printer.
Carton contents
As well as this instructions manual and the NEC Media
Sample Pak, the packing carton also contains ( see figure
on page I ):
A - Printer
C - Manual feeder document support
D - ASF document support
F - Interface socket cover
H - Ink jet print heads
As soon as you have removed the printer and its
accessories from the packing carton, check that all the
parts ordered have been delivered and are undamaged.
If anything is missing or damaged, contact your local
retailer immediately.
Quick Start
B - Power cable
E - Output tray extension
G - Diskette and CD
I - Print head storage box
The interface cable for connecting the printer to
your PC is NOT supplied with the printer.
1. Place the printer on an ample, stable surface
near your computer or work station.
2. Make sure that there is enough space around the printer
for all its parts to be accessed comfortably.
3. Make sure that there is a convenient independent
electrical power supply socket to which you can connect
the printer.
4. Do NOT leave the printer exposed to direct sunlight
or heat sources, or in dusty, dirty or poorly
ventilated environments.

Identifying the Printer Parts

Take a few minutes to study your printer and identify its
parts. Refer to the figures in the first section of the manual.

Connecting Your Printer

To the electrical power supply
Your printer has no ON-OFF switch; once it is connected
to the electrical power supply, it is powered by pressing
the POWER key on the operator panel, so make sure that
it is on a stable surface and that the cover is closed.
1. Insert the power cable in the two-pin connector on the
rear of the printer ( see figure 2a on page II ),
1

Advertisement

Table of Contents
loading

Table of Contents