The Superscript 1800 Status Monitor - NEC SuperScript 1800 User Manual

The SuperScript 1800 Status Monitor

The SuperScript 1800 Status Monitor is an option that can be
installed during or after the installation of any driver for
computers running the Windows 95 and 98 operating
systems. It communicates with the printer to determine the
state of the connection, print job, and whether paper must be
added. The Status Monitor cannot be used to monitor
printers connected to a network.
For information about installing the SuperScript 1800 Status
Monitor, see Chapter 3, "Installing the Software."
Opening the Status Monitor
The Status Monitor can be opened at any time.
To open the Status Monitor From the Windows Start button:
1. Click the Windows Start button.
2. Point to Programs then NEC SuperScript 1800 .
3. Click Status Monitor and the Status Monitor will appear.
SuperScript 1800 Status Monitor for Windows 95 and 98
Current State Tab
28 SuperScript 1800 — User's Guide
The figures shown below display each tab in the
SuperScript 1800 Status Monitor window.
While the Status Monitor is running, its icon can be seen in
the status area of the Windows Task Bar.
Status Monitor icon
If the Status Monitor is hidden behind a window, click the
icon and the monitor will appear.
Preferences Tab About Tab