System Power, Startup, And Shutdown; Automatic Shutdown Utility; Starting The Automatic Shutdown Utility; Setting Time In The Automatic Shutdown Utility - Intergraph InterServe 80 SL System Setup

Hide thumbs Also See for InterServe 80 SL:

Table of Contents

If the power cord is plugged in, but the LED is off, then the system has a power voltage

problem. Call the Intergraph Computer Systems Customer Response Center for assistance.

System Power, Startup, and Shutdown

When you connect the power cord from the InterServe 80 SL to an AC power outlet,

auxiliary power is applied to the system. Among other things, auxiliary power monitors the

Standby button on the front of the system. The Standby button is not a traditional "on or off"

power switch. Depending on the system's current power state, you can use the Standby

button to wake up, start, or shut down the system.

After connecting the system to AC power, press the Standby button momentarily (for less

than 1 second) to start the system. To shut down the InterServe 80 SL, use the Automatic

Shutdown Utility.

The Automatic Shutdown Utility allows you to select among various shutdown options. This

utility provides additional options over the standard shutdown options available from the

operating system Start menu. To access Help for this utility, from the operating system Start

menu, click Programs, click Automatic Shutdown Utility, and then click Automatic

Shutdown Help.

Use one of the following methods to start the Automatic Shutdown Utility:

Double-click the Automatic Shutdown Utility icon in the taskbar tray.

From the operating system Start menu, click Programs, click Automatic Shutdown

Utility, and then click Automatic Shutdown Utility.

While the system is running, momentarily press the Standby button.

By default, the Automatic Shutdown Utility is set for a 10-second delay when starting

shutdown. You can use the slider under Time Remaining to set the delay up to 30 seconds.

You should not set the delay to less than 5 seconds, to ensure that you have time to stop

system shutdown if needed.

Table of Contents

Do you have a question about the InterServe 80 SL and is the answer not in the manual?