Getting Operating System Updates - Intergraph InterServe 80 SL System Setup

26
6. From the Utilities menu, select Device Selections and press
7. From the Device Selections menu, select the SCSI device that you want to configure and
press
NOTE Only eight SCSI devices are listed at a time. Select Device Selections 8-15 to list the next
eight SCSI devices.
NOTE If the device that you want to configure is not listed, exit the menu, repeat step 5 and select
the other host adapter. Then, continue with step 6.
8. Select Sync Rate (Megabytes/sec) and press
9. Select the appropriate rate (Off, 10, 20, or 40) and press
and then press
10. From the Device Selections menu, select Exit This Menu and press
11. From the Utilities menu, select Exit This Menu and press
menu displays.
12. Select Save Changes and press
13. Remove the diskette from the system's floppy disk drive, and then press any key to
restart the system.

Getting Operating System Updates

Microsoft Service Packs contain the latest improvements and system fixes for Microsoft
operating systems. Service Packs are created by Microsoft for post-release support. You can
get Service Packs from the Microsoft World Wide Web and FTP sites free of charge.
CAUTION If Intergraph Computer Systems provides a Service Pack through the IBBS or with a product
or system, it has been certified against Intergraph Computer Systems hardware as described
in the announcement of its availability. If you obtain a Service Pack from any other source,
be aware that it may not be certified against your Intergraph Computer Systems hardware.
.
ENTER
.
ENTER
.
ENTER
.
ENTER
.
ENTER
, select Exit This Menu,
ENTER
.
ENTER
. The Save/Cancel
ENTER