Configuring Scsi Host Adapter Settings; Installing Ess Maestro-2 Pci Sound Adapter Driver; Configuring Ide/Atapi Bus Mastering - Intergraph InterServe 80 SL System Setup

Configuring SCSI Host Adapter Settings

If you previously used the SCSI Configuration Utility on the SYSUTIL diskette to change
SCSI host adapter settings, you must restore those settings after installing the Windows NT
operating system and the Service Pack.
See Chapter 3 for information on configuring SCSI peripherals.

Installing ESS Maestro-2 PCI Sound Adapter Driver

To install the ESS Maestro-2 PCI sound adapter driver:
1. From the Start menu, go to Settings/Control PanelMultimedia/Devices.
2. Click Add.
3. Select Unlisted or Updated Driver, and then click OK.
4. Insert the floppy diskette containing the ESS sound driver in the system's floppy disk
drive.
NOTE The floppy diskette is one of the backup diskettes you created using InterSite Version
Manager.
5. Type A:\ in the text field, and then click OK.
6. When prompted, click OK.
NOTE If Setup finds an older version of any file, click New to continue.
7. When prompted, click Restart Now to restart the system.

Configuring IDE/ATAPI Bus Mastering

After you reinstall the Windows NT operating system and update it with the Windows NT
Service Pack CD-ROM, you must configure IDE/ATAPI Bus Mastering. If you do not
configure Bus Mastering, system performance will significantly degrade when you access the
CD-ROM.
To configure IDE/ATAPI Bus Mastering:
1. Use Windows Explorer to navigate to the \
Pack 3 CD-ROM.
2. Double-click
Current DMA Usage boxes indicate which channels (0, 1, or both) have IDE/ATAPI
devices.
3. Click the Enabled button for each channel with IDE/ATAPI devices.
. . The ATAPI DMA Support dialog box displays. The
DMACHECK EXE
\ \ directory on the Service
SUPPORT UTILS I386
67