Configuring Audio; Configuring Networking; Changing Hard Disk Drive Letters - Intergraph InterServe 80 SL System Setup

Hide thumbs Also See for InterServe 80 SL:
Table of Contents

Advertisement

Configuring Audio

The system is equipped with an on-board ESS Maestro-2 PCI sound adapter. If the system
has a multimedia keyboard or a microphone and speakers, you can use either the operating
system or ESS sound control programs to control them. For information on using the sound
control programs, see the operating system documentation, or Help.

Configuring Networking

If you purchased a network adapter with your system, it was installed before shipment. You
must configure the operating system to use the network adapter. To do this, you may have to
install network driver software and network adapter control software, and then change
operating system settings to enable networking. Before you configure networking, make sure
that the system has an installed network adapter, and that the network adapter is connected
to a network.
To configure networking, open Network in the Control Panel. Follow the instructions in the
dialogs to set up the system to use a network. Be sure to set up the appropriate network
protocols, such as TCP/IP and NetBEUI, for the network you are connecting to.
See the documentation for the installed network adapter (delivered with the system) for
detailed configuration instructions. See the operating system documentation and Help for
information on setting up the system to use a network.

Changing Hard Disk Drive Letters

If you have more than one hard disk drive, you may need to reassign system drive letters.
You can also reassign the CD-ROM drive letter, if needed.
To change drive letters:
1. From the Start menu, click Programs, Administrative Tools, and then Disk
Administrator.
2. Select a hard disk drive.
3. From the Tools menu, click Assign Drive Letter.
NOTE
If you select the current drive or an otherwise locked drive, you must restart the system to
complete the drive letter reassignment.
4. Select a new drive letter to assign to the hard disk drive from the list. Click OK, and
then click Yes to continue.
23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the InterServe 80 SL and is the answer not in the manual?

Questions and answers

Table of Contents