Mitsubishi F5MR1 Manual page 48

22A-6-4
MANUAL TRANSMISSION (E - W) -
MB990938
MB990930
MB990938
MB990934
MB996000
E
E
Mitsubishi Motors Corporation Mitsubishi Motors Corporation
AF" SPEEDOMETER DRIVE GEAR REMOVAL
(1) Pull the shaft out of the speedometer drive gear with
(2) Take the speedometer drive gear out of the differential
AG" SMALL BEARING REMOVAL
(1) Remove the snap ring with a pair of pliers.
(2) Remove the bearing with handle MB990938 and installer
(3) In the case of a new clutch housing, transfer the following
AH" SMALL BEARING CUP REMOVAL
(1) Remove the bearing cup with handle MB990938 and
(2) In the case of a new clutch housing, transfer the following
MB990938
MB990932
RMT0049
REASSEMBLY SERVICE POINTS
"AA SMALL BEARING INSTALLATION
(1) Coat the mating face with the specified sealant.
(2) Press in the bearing with handle MB990938 and installer
(3) Fit the snap ring with a pair of pliers and secure in the
"BA LARGE AND SMALL BEARING CUP
(1) Coat the mating faces with the specified sealant.
(2) Press in the bearing cups with spindle MB996000 and
MB996008
MB996004
RMT0050
May 1996
May 1995
Clutch Housing
a pair of needle nose pliers.
NOTE
Break the shaft if it cannot be released.
housing.
MB990930.
parts:
Studs
Fitted sleeves
installer MB990932.
parts:
- threaded ends;
- fitted dowels.
MB990934.
groove.
INSTALLATION
installers MB996004 and MB996008.
PWEE9508-B PWEE9508 Added