Mitsubishi F5MR1 Manual page 37

RMT0041
E
E
Mitsubishi Motors Corporation Mitsubishi Motors Corporation
MANUAL TRANSMISSION (E - W) -
1
May 1996
May 1995
"NA 4TH GEAR WHEEL INSTALLATION
(1) Locate the gear wheel together with the synchronizer
ring on the shaft.
(2) Fit the shim 1.
NOTE
Make sure that the lugs of the synchronizer ring engage
the recesses in the synchronizer sleeve.
"OA 4TH GEAR WHEEL INSTALLATION
(1) Locate the synchronizer ring.
(2) Locate the gear wheel on the bearing bush.
(3) Fit the shim.
NOTE
In the case of old bearings: fit the old shim.
In the case of new bearings: fit a shim with a thickness
of 1.6 mm.
(4) Fit the bearing.
PWEE9508-B PWEE9508
Output Shaft
22A-4-9
Added