22A-3-12
MANUAL TRANSMISSION (E - W) -
8
E
E
Mitsubishi Motors Corporation
Mitsubishi Motors Corporation
"KA REVERSE IDLER GEAR SHAFT INSTALLATION
(1) Raise the input and output shafts slightly.
(2) Locate the reverse idler gear shaft 8.
(3) Put the shafts into neutral so that the interlock plungers
"LA REVERSE IDLER GEAR SHAFT INSTALLATION
(1) Raise the input shaft slightly.
(2) Locate the reverse idler gear shaft.
RMT0018
"MAOUTPUT SHAFT INSTALLATION
(1) Fit the small dowel pin in the shift rail assembly.
(2) Raise the reverse idler gear shaft slightly and push the
(3) Locate the shift rail assembly together with the 1st and
(4) Locate the two shafts in the clutch housing.
RMT0019
"NA 5TH GEAR SHIFT RAIL ASSEMBLY INSTALLATION
(1) Locate the shift rail assembly 9.
(2) Fit the poppet spring and ball.
(3) Depress the ball and raise the shift rail assembly until
9
"OA 3RD/4TH GEAR SHIFT RAIL ASSEMBLY
(1) Raise the reverse idler gear shaft slightly.
(2) Locate the shift rail assembly together with the 3rd and
(3) Locate the shaft in the clutch housing.
RMT0020
May 1996
May 1995
Transmission
are lying clear.
long dowel pin into the hole.
2nd gear shift fork in the synchronizer sleeve.
the ball engages the second recess (neutral position).
NOTE
Put the shift rail assembly into neutral so that the interlock
plungers are lying clear.
INSTALLATION
4th gear shift fork in the synchronizer sleeve.
Fit a new spring pin in the shift fork (it must be fully
inserted in the shift fork).
NOTE
The slit in the spring pin must be in axial alignment with
the shift rail assembly.
PWEE9508-B
PWEE9508
Added