Mitsubishi F5MR1 Manual page 18

22A-3-6
MANUAL TRANSMISSION (E - W) -
<F5MR3>
E
E
Mitsubishi Motors Corporation Mitsubishi Motors Corporation
RMT0007
AL" SPRING PIN/3RD AND 4TH SHIFT RAIL ASSEMBLY/
(1) Remove the spring pin from the 3rd and 4th gear selector
(2) Take both shafts together with the shift rail assembly
(3) Inspect the input shaft.
AM"INPUT SHAFT/OUTPUT SHAFT REMOVAL
(1) Take the two shafts out of the clutch housing together.
RMT0008
(2) Inspect the input shaft.
RMT0009
May 1996
May 1995
Transmission
INPUT SHAFT/OUTPUT SHAFT REMOVAL
fork.
out of the clutch housing.
NOTE
The shaft must always be renewed in the event of wear
or damage. The shaft cannot be reconditioned.
NOTE
The shaft must always be replaced in the event of wear
or damage. The shaft cannot be reconditioned.
PWEE9508-B PWEE9508 Revised