Mitsubishi F5MR1 Manual page 16

22A-3-4
MANUAL TRANSMISSION (E - W) -
<F5MR1, F5MR2>
<F5MR3>
E
E E
Mitsubishi Motors Corporation Mitsubishi Motors Corporation Mitsubishi Motors Corporation
AF" LOCATING PIN REMOVAL
Unscrew and remove the locating pin.
AG" COVER PLATE/POPPET SPRING/POPPET BALL
Remove the cover plate and withdraw the poppet spring and
ball.
RMT0004
AH" TRANSMISSION CASE/POPPET BALL/POPPET
(1) Remove the retaining bolts.
(2) Tap lightly to separate the transmission case and clutch
(3) Remove the transmission case; note the shim on the
AI" MAGNET/5TH GEAR SHIFT RAIL ASSEMBLY
(1) Remove the magnet from the clutch housing.
(2) Remove the shift rail assembly 9 from the transmission
9
May 1996 May 1996
May 1995
Transmission
NOTE
Do not lose the adjusting ring (if fitted).
REMOVAL
NOTE
Do not lose the poppet spring and ball.
SPRING REMOVAL
housing.
output shaft.
NOTE
When removing the transmission case, hold the poppet
springs and balls of both selector shafts in position with
two hex nut drivers.
REMOVAL
case.
NOTE
Catch the poppet spring and ball and put them to one
side.
PWEE9508-B PWEE9508-B PWEE9508 Revised Revised