Mitsubishi F5MR1 Manual page 17

MANUAL TRANSMISSION (E - W) -
<F5MR1, F5MR2>
10
MD998019
<F5MR3>
10
MD998019
<F5MR1, F5MR2>
<F5MR3>
<F5MR1, F5MR2>
E
E E
Mitsubishi Motors Corporation Mitsubishi Motors Corporation Mitsubishi Motors Corporation
AJ" SPRING PIN/1ST AND 2ND GEAR SHIFT RAIL
(1) Cover the differential drive gear with a cleaning rag.
(2) Tap out the spring pin as far as possible with spring pin
(3) Move 3rd and 4th gear into neutral.
(4) Raise the reverse gear shaft as high as possible and
RMT0005
AK" REVERSE IDLER GEAR SHAFT REMOVAL
(1) Raise the input and output shafts.
(2) Take the reverse idler gear shaft out of the clutch housing.
RMT0006
(3) Inspect the reverse idler gear shaft.
May 1996 May 1996
May 1995
Transmission
ASSEMBLY REMOVAL
extractor MD998019.
remove the shift rail assembly 10.
NOTE
Hold the output shaft at the bottom.
NOTE
The shaft must always be renewed in the event of wear
or damage. The shaft cannot be reconditioned.
PWEE9508-B PWEE9508-B PWEE9508
22A-3-5
Revised Revised