MB996003
E
E
Mitsubishi Motors Corporation
Mitsubishi Motors Corporation
MANUAL TRANSMISSION (E - W) -
DISASSEMBLY SERVICE POINTS
AA" OIL SEAL REMOVAL
(1) Remove the O-ring.
(2) Tap the oil seal inwards at one side and remove it at
AB" SNAP RING REMOVAL
(1) Place the clutch housing under a press and support the
+ 1 mm
(2) Press the clutch housing downwards (1 mm).
(3) Make sure that the bearing abuts accurately against its
(4) Support the clutch housing and press cut the differential
AC" DIFFERENTIAL GEAR ASSEMBLY REMOVAL
MB996005
(1) Lock the differential gear assembly with counterhold
(2) Remove the nut with socket wrench MB996003.
(3) Remove the counterhold and take out the differential gear
(4) Remove the shim.
(5) Take out the bearing.
RMT0043
AD" SPEEDOMETER DRIVE GEAR/SPRING RING/
(1) Take the speedometer drive gear off the differential.
(2) Remove the spring ring.
(3) Remove the guard ring.
May 1996
May 1995
Differential
the other side.
differential gear assembly.
seating.
NOTE
The open side of the bearing must be facing inwards.
assembly out.
MB996005.
assembly.
GUARD GEAR REMOVAL
PWEE9508-B
PWEE9508
22A-5-3
Revised