6
5
4
6
2
3
1
1
130 Nm
MB996003
E
E
Mitsubishi Motors Corporation
Mitsubishi Motors Corporation
MANUAL TRANSMISSION (E - W) -
"BA PINION GEARS INSTALLATION
MD998245
(1) Smear the pinion gears and thrust washers with grease.
(2) Locate the pinion gears 6 together with the thrust washers
(3) Locate the bush 5 over the shaft.
(4) Locate the pinion gears 6 together with the thrust washers
5
(5) Fit the spring pin with the slit at right-angles to the shaft
4
"CA SIDE GEAR INSTALLATION
(1) Smear the side gears with grease.
(2) Insert the side gear 3.
(3) Locate the shim 2.
(4) Fit the snap ring 1.
2
3
"DA SPEEDOMETER DRIVE GEAR INSTALLATION
(1) Locate the speedometer drive gear with the locking lug
(2) Place the guard ring on the differential.
(3) Place the spring ring on the differential.
RMT0044
"EA SPEEDOMETER DRIVE GEAR/SPRING RING/
(1) Locate the speedometer drive gear with the locking lug
(2) Place the guard ring on the differential.
(3) Place the spring ring on the differential.
"FA DIFFERENTIAL GEAR ASSEMBLY INSTALLATION
MB996005
(1) Locate the differential gear assembly in the clutch housing.
(2) Lock the differential gear assembly with counterhold
(3) Fit the shim.
(4) Locate the bearing.
(5) Smear the nut with a locking agent (Loctite 270).
(6) Fit the nut with the opening facing towards the bearing.
RMT0045
May 1996
May 1995
Differential
and fit the shaft 4.
and press the shaft in further.
and tap it in with spring pin installer MD998245.
in the recess in the differential.
GUARD GEAR INSTALLATION
in the recesses in the differential.
MB996005.
PWEE9508-B
PWEE9508
22A-5-5
Added