Options; Display Stand / Wall-Mount - A&D SW-D Setup Instructions

For details of HC-02i, SW-03, and SW-04, refer to the "OPTIONS" in the SW series
instruction manual.
9.1. SW-11 Display stand / Wall-mount
SW-11 provides the function as a display stand or a wall-mount for the SW-D.
Attaching to SW-11
1. Attach the SW-11 to the display using the four screws provided.
2. Adjust the display angle using the two clamps on the SW-11.
After loosening the two clamps on the SW-11, adjust the display angle, and re-
tighten the two clamps.
Clamp
3. If you want to use the SW-11 as wall-mount bracket, after fixing only the stand part of
the SW-11 on the flat wall by using the screws, attach the display to the SW-11.
(These screws are not provided.)
For details of the installing dimension, refer to "11.2. External dimensions".

9. OPTIONS

SW-11
19