Table of Contents
Advertisement
11.1. Specifications
Input sensitivity
Input signal range
Load cell excitation
voltage
Load cell drive capacity
Zero
Temperature
coefficient
Span
linearity
Maximum display
resolution
Display
Display update
Operating temp.
Power supply
Dimension
Weight
* In the case of one 350 ohm load cell, no other option, and turning on comparator LED
(The available use times depend on the condition of the battery, how the battery is used
and the environment.)
Options
HC-02i
SLA Sealed Lead Acid battery (YUASA NP4-6 recommended)
SW-03
RS-232C / Relay output
SW-04
RS-422 / 485
SW-11
Display stand / Wall-mount
Note: The options, SW-03 and SW-04, can not be used at the same time.
11. SPECIFICATIONS
0.2 µV / d min. (d: minimum division)
-16 mV ~ 16 mV
5 V DC ±5% (no remote sensing)
Up to 4 x 350 ohm load cells
±(0.2 µV ±0.001% of zero adjustment voltage) / °C (typ.)
±0.001% / °C of reading (typ.)
±0.01 % of full scale
60,000
Weight display: 7 segment LED display (Character height 14.6 mm)
Comparison result: red / yellow / green / yellow / red LED
Approximately 10 times per second
-10°C ~ 40°C / 14°F ~ 104°F
AC main (100V +10%/-15%, 50/60 Hz 20VA)
or SLA Battery (option), available use time approximately 70
hours*
Main power cord length: Approximately 3 m
255 (W) x 119 (D) x 179 (H) mm
Approximately 2.1 kg
21
Advertisement
Table of Contents
