Options - A&D FZ-i WP Series Instruction Manual

Accessories
Note
The FXi-02, FXi-08 and FXi-09 can not be used at the same time.
Using the FXi-02, FXi-08 or FXi-09 with the FX-iWP, FZ-iWP
series prevents the balance from having the dustproof and
waterproof performance.
FXi-02 USB interface
(Installed in the balance, Applicable OS: Windows 98 OSR2 or later)
 Used to transmit the balance weight data (numerical
value only) uni-directionally to a personal computer
via USB.
 Can transmit the balance weight data (numerical
value only) directly to application software such as
Microsoft Excel, Word and memo pad.
 Driver installation is not necessary.
Note
To perform bi-directional communication using
WinCT or input statistical data or GLP data to a
personal computer, use the USB converter
(AX-USB-9P-EX)
FXi-08 Ethernet interface
 Used to connect the balance to a LAN.
 The "WinCT-Plus" data communication software is
provided as a standard accessory and can perform the
following.
Acquire data from multiple balances connected to
a LAN.
Control these balances with commands.
Acquire data transmitted from balances.
Example: When pressing the PRINT key of the
balance, data is output and is acquired by the
computer.
The stored data can be used with Microsoft Excel
(if installed).
FXi-09 Built-in battery unit (Ni-MH rechargeable battery pack)
 Charging time: Approximately 10 hours.
 Continuous operation hours: Approximately 8 hours
Note
The charging time depends on the operating environment. During charging, the balance is
not available for use.

21. OPTIONS

82
FX i –02 Example of use
FX i –08 Example of use