Testing The Telephone; Testing The Telephone Functions; Checking The Key Assignment - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Program/Service
* 940=Phone test?
qmhd
Program/Service
* 91=Prog. feature key?
US: Another key?
UK: Program another key?
US: Exit?
UK: End?

Testing the Telephone

Testing the Telephone Functions

You can test your telephone functions.
Precondition: Your telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
If everything is OK,
• all LEDs on the telephone start flashing, including
the ones on the key module (only the Program/Ser-
vice menu LED lights up);
• your station number appears on the screen;
• all pixels in the display are activated;
• the ringer signal sounds.

Checking the Key Assignment

You can check the assignment of keys on your tele-
phone to see which functions are programmed on
which keys.
Press the key. The LED lights up.
Select and confirm.
or
qme
Enter the code.
Press the key. The key assignment appears on the
screen.
Select and confirm.
or
Select and confirm.
Testing the Telephone
105