Effect Presets - Korg Kronos Operation Manual

Effect Presets

Effect Presets let you easily store and recall all of the
settings for an individual effect. You can store up to 16
user presets for each effect type, in addition to 15 re‐
writable factory presets.
Wet/Dry Effect Parameters
The same presets appear in all of the modes (Program,
Combination, Sequence, and Sampling), and sets of
presets can be saved to and loaded from disk.
Note that edits to effects parameters are automatically
stored with the Program, Combination, or Song–you
don't need to store them as an Effect Preset. Presets just
make it easier to re‐use your favorite settings.
For instance, you can save an Effect Preset while
working on a particular Program, and then later use
the same Effect Preset in a different Program, Combi,
or Song.
Note: Programs, Combinations, and Songs save the
effects parameter settings, but they don't save the
number of the selected Effect Preset. If you select an
Effect Preset, and then save the Program, the Effect
Preset setting will revert to "‐‐‐‐‐‐‐‐‐‐‐‐‐‐."
Selecting Effect Presets
1. Select an effect in the Insert FX page.
2. The P00: Initial Set settings will be recalled.
"P (Effect Preset)" will show ‐‐‐‐‐‐‐‐.
3. Use "P (Effect Preset)" to select an effect preset:
P00–P15 or U00–U15.
The stored parameters will be recalled. Note that this
will overwrite all parameters of the effect.
P00: Initial Set: These are the default settings that are
recalled when you select an effect type in the Insert FX
page. You can't save your own settings here.
P01...P15: These contain Korg preset data. We
recommend that you store your settings in U00–U15.
U00...U15: These are areas in which you can store your
own settings.
Effect On/Off P (Effect preset)
Detailed effects editing Effect Presets
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐: This shows that no Effect Preset has been
selected. You'll see this if you've just selected an effect,
written a Program, or selected a new Program.
Selecting this setting from the menu will not have any
effect.
4. Edit the recalled parameters as desired.
Saving Effect Presets
If you've come up with settings you like and want to
save them as a new preset, you can save them.
1. On the IFX 1‐12 page, touch the menu button to
open the page menu.
2. In the menu, select the Write FX Preset command.
The Write FX Preset dialog will appear.
3. Name the Preset as desired.
4. Open the "To" popup, and select the Preset
number to save to.
You can save into any of the slots, but we recommend
that you store your settings in U00–U15.
5. Press OK to save the Preset, or Cancel to exit
without saving.
211