Set Lists
Selecting and playing sounds
Set List Play page
Set List Name
Slot Name
Slot Comments
Selected Slot
Previous
button
Selecting Set Lists
The large name in the Set List display is the name of
the current Slot, so that you can easily see the sound
that you're playing. The Set List name is in smaller text
at the top left‐hand corner of the screen.
Selecting with the front-panel buttons
You can select Set Lists using the front‐panel buttons,
without touching the screen. To do so:
1. Press the SET LIST button to enter Set List mode.
2. Press the Play tab to go to the Set List P0: Play
page.
The main Play page shows the 16 Slot buttons, the
comments for the current Slot, and an overview of the
EQ.
3. Touch the Set List name to select it.
The Set List name will become highlighted.
4. Use the VALUE controllers to select the desired Set
List.
You can do any of the following:
• Turn the Value dial.
• Press the Inc
• Use the numeric keypad [0]–[9] to specify the
number, and press the ENTER key.
114
or Dec
buttons.
The VALUE slider is reserved for modulation, and
sends CC#18 when the Slot contains a Program or
Combination.
Once you've selected a Set List, you can select Slots
within the list. For more information, see "Selecting
Slots," below.
Selecting via the touch-screen
You can select Set Lists from an on‐screen list, as well.
1. Press the Set List popup button (to the left of the
Set List name).
The Set List Select dialog appears.
2. Press one of the names in the list to select a Set
List.
The selected Set List will be highlighted, and the
keyboard will immediately switch to the first Slot in
the Set List.
3. If you like, play a few notes to hear the sound of
the first Slot in the Set List.
4. When you are satisfied with the selected Set List,
press the OK button to close the popup menu.
Alternately, you can press the Cancel button to return
to the previously selected Set List.
Next button