Effect Presets - Korg kronos Operation Manual

Effect Presets

Effect Presets let you easily store and recall all of the
settings for an individual effect. You can store up to 16 user
presets for each effect type, in addition to 15 re-writable
factory presets.
Effect On/Off
Wet/Dry Effect Parameters
The same presets appear in all of the modes (Program,
Combination, Sequence, and Sampling), and sets of presets
can be saved to and loaded from disk.
Note that edits to effects parameters are automatically stored
with the Program, Combination, or Song–you don't need to
store them as an Effect Preset. Presets just make it easier to
re-use your favorite settings.
For instance, you can save an Effect Preset while working on
a particular Program, and then later use the same Effect
Preset in a different Program, Combi, or Song.
Note: Programs, Combinations, and Songs save the effects
parameter settings, but they don't save the number of the
selected Effect Preset. If you select an Effect Preset, and then
save the Program, the Effect Preset setting will revert to "----
----------."
Selecting Effect Presets
1. Select an effect in the Insert FX page.
2. The P00: Initial Set settings will be recalled.
"P (Effect Preset)" will show --------.
3. Use "P (Effect Preset)" to select an effect preset: P00–
P15 or U00–U15.
The stored parameters will be recalled. Note that this will
overwrite all parameters of the effect.
P00: Initial Set: These are the default settings that are
recalled when you select an effect type in the Insert FX page.
You can't save your own settings here.
P01...P15: These contain Korg preset data. We recommend
that you store your settings in U00–U15.
U00...U15: These are areas in which you can store your
own settings.
---------------: This shows that no Effect Preset has been
selected. You'll see this if you've just selected an effect,
written a Program, or selected a new Program. Selecting this
setting from the menu will not have any effect.
4. Edit the recalled parameters as desired.
Saving Effect Presets
If you've come up with settings you like and want to save
P (Effect preset)
them as a new preset, you can save them.
1. On the IFX 1-12 page, touch the menu button to open
the page menu.
2. In the menu, select the Write FX Preset command.
The Write FX Preset dialog will appear.
3. Name the Preset as desired.
4. Open the "To" popup, and select the Preset number to
save to.
You can save into any of the slots, but we recommend that
you store your settings in U00–U15.
5. Press OK to save the Preset, or Cancel to exit without
saving.
Detailed effects editing Effect Presets
223