Playing and editing Programs
Important: Setting a bank's type will erase all of the
Program data in the bank ‐ so make sure that you're
not erasing any Programs you want to keep!
5. Press the OK button.
An "are you sure?" dialog appears.
6. If you're certain of the change, press OK again.
The selected banks will now be initialized to use the
new Program types.
Selecting with the front-panel buttons
You can select Programs using the front‐panel buttons,
without touching the screen. To do so:
1. Make sure that the front‐panel PROG button is lit.
This means that you're in Program mode, in which you
can select and edit Programs. If the button isn't lit,
press it now; it will light up, and the main Program
Play page will appear.
2. Go to the main Program Play page.
The main Play page shows an overview of the sound
structure, such as oscillators, filters, etc.
3. Make sure that the Program name is selected.
If it is not selected, go to the PROGRAM P0: Play page
and touch the Program's name, so that it's highlighted.
4. Use the VALUE controllers to select the program
number that you wish to play.
You can use the following methods to select a program.
• Turn the Value dial.
• Press the Inc
• Use the numeric keypad [0]–[9] to specify the
number, and press the ENTER key.
5. To select banks INT–A...G or USER–A...G, press
and release the corresponding BANK button.
For example, to select bank INT–B, press the I–B button
in the top row of Bank buttons. The I–B button will
light, and the name INT–B will appear in the upper left
of the LCD screen.
When you select a Bank, the button's LED will light,
and the selected bank will appear on the upper left side
of the LCD screen.
6. To select banks USER–AA...GG, press and hold a
pair of I and U BANK buttons together.
For example, to select bank USER–CC, press and hold
the I–C button, and then press the U–C button. If you
prefer, you can also press them in the opposite order:
first U–C, and then I–C.
28
or Dec
buttons.
Selecting by bank and number
You can select Programs from a list organized by
Program bank.
1. Press the Program Select popup button.
The Bank/Program Select dialog appears.
Bank/Program Select menu
In this illustration, bank INT–A is selected. The list on
the right shows the Programs contained in that bank.
2. Press the tabs on the left side of the display to
select a bank.
There are more banks than can be shown at one time,
so the banks are divided into two groups of tabs: INT–
A...USER–G and USER–AA...USER–GG.
3. If necessary, use the "More..." buttons below the
tabs to switch between showing the tabs for INT–
A...USER–G and USER–AA...USER–GG.
4. Press one of the Program names in the list to select
a Program.
The selected Program will be highlighted, and the
keyboard will immediately switch to the new sound.
5. If you like, play a few notes to hear the new
Program.
You can play the new Program while the menu is still
showing, without needing to press OK.
6. When you are satisfied with the selected Program,
press the OK button to close the popup menu.
If you press the Cancel button, the selection you made
here will be discarded, and you will return to the
program that had been selected before you opened the
menu.