Playing Songs The control surface in Sequencer mode
The LEDs at the right of the AUDIO switch indicate
whether audio inputs, audio tracks 1–8, or audio tracks
9–16 are currently selected. The sliders, knobs, and
switches will control the respective set of inputs or
tracks.
KNOBS: If you press the MIXER KNOBS switch to
make the INDIVIDUAL PAN LED light, the knobs will
control the Pan setting of the six inputs, tracks 1–8, or
tracks 9–16. If the CHANNEL STRIP LED is lit and IN
is selected, the knobs will control the pan and effect
sends for a single input. If 1–8 or 9–16 are selected, the
knobs will control the pan, EQ, and effect sends for a
single track.
Use the MIX SELECT switches to select the input/track
you want to control, and use the knobs to control them.
MIX PLAY/MUTE, MIX SELECT: These switches work
in the same way as they do for TIMBRE/TRACK, as
described above.
EXTERNAL
When EXTERNAL is selected, the control surface is
used to transmit MIDI messages to an external MIDI
device. For more information, see "0–9e: External" on
page 540 of the Parameter Guide.
RT KNOBS/KARMA
When RT KNOBS/KARMA is selected, the sliders and
switches of the control surface are used to control
KARMA. For more information, see "0–9f: RT (Real
Time Knobs)/KARMA" on page 541 of the Parameter
Guide.
TONE ADJ/EQ
When TONE ADJ/EQ (Tone Adjust) is selected, the
control surface is used to temporarily adjust the
program used by each MIDI track. For example while
you're creating a song, you can use this capability to
adjust the sound appropriately for your song without
going back to Program mode; you might soften the
tone of the bass or speed‐up the attack of a strings
program, and make these changes happen in realtime
while the song plays.
Use Track in the right side of the LCD to select the
MIDI track you want to adjust.
For more information, see "0–9g: Tone Adjust" on
page 543 of the Parameter Guide.
Note: EQ is only available in Set List mode. For more
information, see "Graphic EQ" on page 119.
75