command Convert to ISO9660 Format (Disk–
Utility page) to convert the disc to ISO9660 format.
However depending on the state in which the disc
was saved, it may be converted into ISO9660 level 3
format, and may still not be recognized. In this case
if you install ISO9660 level 3 compatible reader
software or packet writing software on your
computer, it will be possible to recognize the disc.
A CD‐R/RW that was saved or copied on the KRONOS
using packet writing is not recognized by the
TRITON/TRITON pro/TRITON proX/ TRITON‐
Rack/TRITON Le.
• These models do not support UDF version 1.5, and
therefore will not recognize such a disc.
• In the case of a CD‐R, it may be possible to make
the disc be recognized by executing the page menu
command Convert to ISO9660 Format (Disk–
Utility page) to convert the disc to ISO9660 format.
However depending on the state in which the disc
was saved, it may be converted into ISO9660 level 3
format, and may still not be recognized.
Can't write audio tracks
Additional writing is not possible on a CD‐R/RW disc
that has been finalized.
Can't play back the disc on an audio CD player
Did you finalize the disc?
• If you want to finalize the disc after writing
additional data, check the Execute finalize too
check box when executing the page menu
command "Write to CD" (Disk– Make Audio CD),
so that the disc will be finalized. For more
Other problems
Power turns off automatically
If the KRONOS is not cooled adequately, the internal
temperature will rise. The power supply may shut
down automatically to protect the device from high
temperatures.
Date and time are incorrect
Saved files or sampled WAVE files have an incorrect
date or time.
• Use the page menu command Set Date/Time
(Disk– Utility page) to set the current date and time.
For more information, see "Setting the date and
time" on page 198.
Does the message "The clock battery voltage is low.
Please replace the battery, and set the date and time in
Disk mode" appear? If so, the calendar backup battery
needs to be replaced. Your Korg Distributor can help
you find a service center to replace the battery.
Troubleshooting Other problems
information, see "Write to CD" on page 854 of the
Parameter Guide.
• If you only want to finalize the disc, select the page
menu command Finalize Audio CD (Disk– Make
Audio CD), and press the OK button to finalize the
disc. For more information, see "Finalize Audio
CD" on page 855 of the Parameter Guide.
Are you using CD‐R media?
• Since some CD players are unable to play CD‐RW
media, we recommend that you use CD‐R media.
Have you tried using a different type of media?
• Some CD‐R/RW media cannot be played by some
CD players. You may be able to play back
successfully by using a different type (brand) of
CD‐R/RW media.
WAVE files
Can't load
Is the WAVE file in a format that the KRONOS can
load?
• Only 48 kHz or 44.1 kHz WAVE files can be
inserted into an audio track in a Song, or into the
Track CD List.
Can't preview
Is the WAVE file in a format that the KRONOS can
load?
• Only 48 kHz or 44.1 kHz WAVE files can be
previewed by pressing the Play button in the
directory window.
255