Creating songs (Sequencer mode)
Other ways to record
Multi-track recording with KARMA and
the Drum Track
You can record multi‐track performances generated by
KARMA and/or the Drum Track. For more
information, see "Using KARMA in Sequencer mode"
on page 232.
Multi-track recording with RPPR
You can record multi‐track performances generated by
RPPR. For more information, see "Using RPPR
(Realtime Pattern Play/Record)" on page 106.
Using the control surface to record
changes in the pan, EQ, volume, or Tone
Adjust parameters of a MIDI track
During realtime recording, you can use the control
surface to control the pan, EQ, volume, or Tone Adjust
parameters, and record these changes so that they will
be reproduced during playback.
If you will be adjusting more than one track
simultaneously, you'll need to use multi‐track
recording.
Note: Changes you make using the control surface are
transmitted as control changes or system exclusive
messages. In order to record these changes, the Global
P1: MIDI– MIDI Enable Control Change and Enable
Exclusive items must be checked. Move to Global
mode and make sure that these items are checked.
88