Korg Kronos Operation Manual page 225

3. Use the front panel SCENE 1–8 switches to choose
a scene.
The sliders and switches will change to the settings
that were saved in the scene you chose.
Each of the eight scenes contains the values of sliders
1–8 and switches 1–8. By pressing a SCENE 1–8 switch
to choose a scene, you can instantly recall settings for
the eight sliders and eight switches.
Even if you switch scenes, the changes you make using
sliders 1–8 and switches 1–8 are remembered until you
select another program. When you write a program,
your slider and switch settings are saved in the
respective scene 1–8.
Restoring the state of the sliders and switches
You can do this by adjusting the controls while you
watch the sliders and switches in the screen, or you can
use the following method.
Restoring the entire program
1. Press the COMPARE switch.
The entire program will revert to the state in which it
was written. (See "Using COMPARE" on page 42.)
2. Press the COMPARE switch once again.
The program will return to the edited state.
Restoring all sliders and switches of the selected
scene
1. Operate the sliders and switches to edit the values
saved in the program.
The LED of the selected SCENE switch will blink.
2. Hold down the RESET CONTROLS switch, and
press the SCENE switch.
All sliders and switches will be reset to their stored
settings, and the SCENE switch LED will light.
3. Once again, hold down the RESET CONTROLS
switch and press the SCENE switch.
All sliders and switches will return to the edited state
of step 1, and the SCENE switch LED will blink.
Restoring a single slider or switch
1. Operate the sliders and switches to edit the values
saved in the program.
2. Hold down the RESET CONTROLS switch, and
operate the slider or switch that you want to
restore.
The selected slider or switch will return to its stored
setting.
Restoring all scene settings
1. In each scene, operate the sliders and switches to
edit the values saved in the program.
2. Hold down the RESET CONTROLS switch, and
press the MODULE CONTROL switch.
All scenes will return to their stored settings.
If you've used the RESET CONTROLS switch to
return all scenes to their original setting, there is no
way to return to the edited settings of step 1.
Resetting the REALTIME CONTROL knob settings for
all scenes
Performing with KARMA Performing with KARMA in Program mode
1. Use the REALTIME CONTROL knobs to edit the
sound of the program, and use the sliders and
switches to modify the saved settings in each
scene.
2. Hold down the RESET CONTROLS switch, and
press the CONTROL ASSIGN RT
KNOBS/KARMA switch.
The Real‐Time Controls knob settings will be reset (to
the center value of 064), and the settings of all scenes
will return to their stored settings.
If you've used the RESET CONTROLS switch to
reset the Real‐Time Controls knobs and to return all
scenes to their saved setting, there is no way to
return to the edited settings of step 1.
Selecting a GE (Generated Effect)
When KARMA is on, the KARMA module uses a GE to
generate phrases or patterns. The KRONOS provides a
wide range of GEs that you can use for a variety of
instruments, playing techniques, and musical styles
(See "The structure of KARMA" on page 213).
For each of the pre‐loaded programs, a GE that's
appropriate for the sound of the program is already
selected. If you switch to a different GE, the generated
phrase or pattern will change dramatically.
1. Go to the Program P0: Play– KARMA GE page.
2. In the display, press the "GE Select" popup button
to open the "GE Select" menu.
3. Select a GE from the list in the right side of the
display.
The selected GE will be highlighted and will become
active.
219