Using KARMA
KARMA CONTROLS sliders 1–8
KARMA SWITCHES 1–8
KARMA SCENES 1–8
When CONTROL ASSIGN is set to RT KNOBS/
KARMA, these control the KARMA module(s) selected
by MODULE CONTROL.
By operating these controls, you can adjust GE realtime
parameters and KARMA module parameters to freely
vary the phrases or patterns generated by the KARMA
module. (Use "GE RTP, Perf RTP" to specify the
parameter that each control will affect.)
SCENE switches
These switches let you store the settings of sliders 1–8
and switches 1–8 as eight different "scenes" (SCENE 1–
8). In Combination or Sequencer modes, scenes can
store separate settings for each module, and you can
use the MODULE CONTROL switch and the Scene
Matrix function to control this.
For more information, see "7–5d: Module Control
Scene Matrix" on page 479 of the Parameter Guide.
216