Common To Midi Tracks And Audio Tracks - Korg Kronos Operation Manual

Creating songs (Sequencer mode)
Pattern editing
Step Recording (Loop Type): Here you can perform
step recording into a pattern. For more information,
see "Step Recording (Loop Type)" on page 654 of the
Parameter Guide.
Event Edit: Here you can edit individual events of the
musical data in a pattern. For more information, see
"Event Edit" on page 654 of the Parameter Guide.
Pattern Parameter: This command specifies the
number of measures and the time signature of the
selected pattern. For more information, see "Pattern
Parameter" on page 655 of the Parameter Guide.
Erase Pattern: This command erases the data from the
selected pattern. For more information, see "Erase
Pattern" on page 655 of the Parameter Guide.
Copy Pattern: This command copies the settings and
musical data of the selected pattern to another pattern.
For more information, see "Copy Pattern" on page 655
of the Parameter Guide.
Bounce Pattern: This command combines the musical
data of the bounce source pattern and bounce
destination pattern, and places the combined musical
data in the bounce destination. For more information,
see "Bounce Pattern" on page 655 of the Parameter
Guide.

Common to MIDI tracks and audio tracks

Erase Track: This command erases the data from the
specified track. It is not possible to erase the master
track by itself. For more information, see "Erase Track"
on page 642 of the Parameter Guide.
Copy Track: This command copies musical data from
the copy source track to the specified track. For more
information, see "Copy Track" on page 642 of the
Parameter Guide.
Erase Measure: This command erases the specified
type(s) of musical data from the specified range of
measures. The Erase Measure command can also be
used to remove only a specific type of data. Unlike the
Delete Measure command, executing the Erase
Measure command does not cause the subsequent
measures of musical data to be moved forward. For
more information, see "Erase Measure" on page 643 of
the Parameter Guide.
Delete Measure: This command deletes the specified
measures. When the Delete Measure command is
executed, the musical data following the deleted
measures will be moved towards the beginning of the
sequence. For more information, see "Delete Measure"
on page 644 of the Parameter Guide.
Insert Measure: This command inserts the specified
number of measures into the specified track. When you
execute the Insert Measure command, the musical data
following the insert location will be moved backward.
For more information, see "Insert Measure" on
page 645 of the Parameter Guide.
Repeat Measure: This command repeatedly inserts the
specified measures for the specified number of times.
When you execute the Repeat Measure command, the
104
Get From MIDI Track: This command takes musical
data from a MIDI track and loads it into the specified
pattern. For more information, see "Get From MIDI
Track" on page 656 of the Parameter Guide.
Put To MIDI Track: This command places a pattern
into a MIDI track. For more information, see "Put To
MIDI Track" on page 656 of the Parameter Guide.
Copy To MIDI Track: This command copies the
specified area of musical data from the specified
pattern to a MIDI track as musical data. For more
information, see "Copy To MIDI Track" on page 656 of
the Parameter Guide.
Convert to Drum Track Pattern: This command
converts a user pattern into a user drum track pattern,
which can then be used with the Drum Track in any
mode. For more information, see "Convert to Drum
Track Pattern" on page 657 of the Parameter Guide.
Load Drum Track Pattern: This command loads a user
Drum Track pattern into a user pattern. For more
information, see "Load Drum Track Pattern" on
page 657 of the Parameter Guide.
Erase Drum Track Pattern: This erases the specified
Drum Track pattern. For more information, see "Erase
Drum Track Pattern" on page 635 of the Parameter
Guide.
measures will be inserted following the measure
specified by "To End of Measure," and musical data
following the inserted data will be moved backward.
For more information, see "Repeat Measure" on
page 646 of the Parameter Guide.
Copy Measure: This command copies the measures of
musical data specified as the "From" source to the
beginning of the measure specified as the "To"
location. When you execute the Copy Measure
command, the existing track data at the copy
destination will be rewritten. For more information,
see "Copy Measure" on page 646 of the Parameter
Guide.
Move Measure: This command moves the specified
measures of performance data to another measure.
When you execute the Move Measure command, the
performance data following the move‐source measures
will move forward by the corresponding number of
measures, and the performance data following the
move‐destination will move backward (i.e., later in the
song) by the same number of measures. For more
information, see "Move Measure" on page 647 of the
Parameter Guide.