Error And Confirmation Messages; A (Adc-Are You Sure); B (Buffer); C (Can't Calibrate-Completed) - Korg Kronos Operation Manual

Appendices

Error and confirmation messages

A (ADC–Are You Sure)
ADC Overload
Meaning: If the ADC OVERLOAD! indication
appears above the Recording Level bar, the signal is
distorting because of an overload at the AUDIO
INPUT stage. To solve this problem:

B (Buffer)

Buffer overrun error occurred
Meaning: When sampling to external USB media, the
processing could not keep up with the sampling. To
solve this problem:
• Execute the Disk Utility page menu command
Check Medium. Then try the sampling operation
again. If this does not resolve the problem, copy
several files from that media to other media, delete
those files, and then try the sampling operation
again.
Note: Sampling may not be possible because of the
media you're using. Please use the recommended types
of media.
C (Can't calibrate–Completed)
Can't calibrate
Meaning: Calibration could not be performed
correctly.
• Try again.
Can't execute Audio Track recording
Meaning: You attempted to record audio tracks when
Recording Setup is set to Loop All Tracks
• You cannot perform audio track recording with
Loop All Tracks. Choose a different Recording
Setup, and try recording again.
Meaning: You attempted to record audio tracks with
the Global mode MIDI Clock set to External
MIDI/USB or Auto MIDI/USB, and an external device
(such as a computer or another MIDI device) is acting
as the MIDI clock master
• You cannot perform audio track recording when an
external device is the MIDI clock master. Set MIDI
Clock to Internal so that the KRONOS is the MIDI
clock master.
256
• Adjust the MIC/LINE gain select switch, the LEVEL
knob , or the output level of your external audio
source.
Are you sure?
Meaning: This message asks you to confirm execution.
To execute press the OK button. To cancel, press the
Cancel button.
Note: If the "Buffer overrun error occurred" error
message appears. the data up to the point the error
occurred has been sampled, but the data at the point
the error occurred may not play back correctly.
Buffer underrun error occurred
Meaning: When playing back a WAVE file from
external USB media, the data could not be read fast
enough for playback processing.
• Copy the file you want to play into another folder,
and then execute the operation again.
Note: Playback may not be possible because of the
media you're using. Please use the recommended types
of media. (Media that can be used on the KRONOS.)
Meaning: If the Global mode Memory Protect
parameter Internal HDD Save is checked, writing to
the internal disk is prohibited. This error message will
appear if you attempt to record on audio tracks in this
state.
• Uncheck the Internal HDD Save item, and try the
recording again.
Can't insert event in stereo track
Meaning: In Sequencer mode, you were performing
audio event editing on an audio track that is assigned
as a stereo pair, and were unable to insert an audio
event because the paired track contained an audio
event.
• Delete the unwanted audio event from the paired
audio track, and then insert the desired event.
Can't load divided PCG file
Meaning: The page menu command Load PCG
(RAM) and Samples cannot be performed on a
divided PCG file.