Unpacking - Jet J-1230R Operating Instructions And Parts Manual

6.2 Unpacking

Remove any remnants of the shipping crate and
check for shipping damage. Report any damage
immediately to your distributor and shipping
agent. Do not discard any shipping material until
the Radial Arm Drill Press is installed and
running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Read and understand the entire contents of this manual before attempting set-up or operation!
Failure to comply may cause serious injury.
Contents of Shipping Container
(Figure 9)
1 Radial Arm Drill Press (not shown)
6 Leveling Pads
1 Tool Box, containing:
1 Grease gun
1 Oil bottle
1 Tapered Drift
1 Adjustable wrench
1 Set of hex keys
1 Flat blade screwdriver
1 Cross point screwdriver
1 Instructions and Parts Manual (not shown)
1 Warranty Card (not shown)
1 Manufacturer's Test Chart (not shown)
Figure 8
13