Table of Contents
Advertisement
6.2 Unpacking
Remove any remnants of the shipping crate and
check for shipping damage. Report any damage
immediately to your distributor and shipping agent.
Do not discard any shipping material until the
Radial Arm Drill Press is installed and running
properly.
Compare the contents of your container with the
following parts list to make sure all parts are intact.
Missing parts, if any, should be reported to your
distributor. Read the instruction manual thoroughly
for assembly, maintenance and safety instructions.
Read and understand the entire contents of this manual before attempting set-up or
operation! Failure to comply may cause serious injury.
Contents of Shipping Container
(Figure 6-3)
1
Radial Arm Drill Press (not shown)
6
Leveling Pads
1
Tool Box, containing:
1
Grease gun
1
Oil bottle
1
Tapered Drift
1
Adjustable wrench
1
Set of hex keys
1
Flat blade screwdriver
1
Cross point screwdriver
1
Instructions and Parts Manual (not shown)
1
Product Registration Card (not shown)
1
Manufacturer's Test Chart (not shown)
Figure 6-3
11
Advertisement
Table of Contents
