Maintenance; Cleaning; Greasing - JUKI PLK-J10050R Technical Manual

8. MAINTENANCE

(1) Please make sure to turn the power switch off before cleaning the sewing machine.
(2) Please pay attention to that staining your skin or eyes with oil may cause an inflammation.

8-1. Cleaning

(1) Remove the dust and the thread waste sticking regularly.

8-2. Greasing

(1) The dust or the like sticking absorbs lubrication oil on the rails and significantly lowers the slide guide
running life. Remove the dust and the thread waste sticking regularly and greasing every six months.
(2) For the guide rail, grease to the both side of guide groove. For the ball screw shaft, grease to the
surface of shaft. After greased, apply the grease uniformly by moving the XY table by hand.
<1>: X guide rail <2>: Ball screw shaft <3>: Y guide rail (four rails)
Recommended grease: Lithium grease 2
<2>
<3>
CAUTION
<1>
<3>
<3>
- 47 -
<3>