Maintenance; Replacing The Fuse - JUKI SC-510 Series Engineer's Manual

11. MAINTENANCE

(1) Replacing the fuse

WARNING :
To prevent personal injuries caused by electric shock hazards or abrupt start of the sewing machine,
remove the cover after turning OFF the power switch and a lapse of 5 minutes or more. To prevent personal
injuries, when a fuse has blown out, be sure to replace it with a new one with the same capacity after
turning OFF the power switch and removing the cause of the blown-out of the fuse.
1) Press the OFF button of the power switch to turn
OFF the power after confirming that the sewing ma-
chine has stopped.
2) Draw out the power cord coming from the power plug
socket after confirming that the power switch is turned
OFF. Perform the work of step 3) after confirming
that the power has been cut and it has passed for 5
minutes or more.
3) Loosen setscrew
4) Pressing the side of front cover
the arrow, open the front cover
(Caution) Be sure to open / close the front cover
with your hands.
– 112 –
in front cover .
in the direction of
toward you.