2. Managing The Cord; 3. Installing The Eye Protection Cover - JUKI LK-1901AN Instruction Manual

12. Managing the cord
) In the state that the sewing machine is tilted, connect the cords, and bundle them with clip band 1
as shown in the figure.
2) Fix the cords with cords setting plate 2 in the state that the cords slacken as shown in the figure.
When you tilt the sewing machine, make sure that the sewing machine head support bar is
placed on the table.
13. Installing the eye protection cover
WARNING :
Be sure to attach this cover to protect the eyes from the disperse of needle breakage.
2
1
3
1
2
Be sure to use eye protection cover 1 after install-
ing it on installing section 3 with screws 2 .

－ －
Slack