Sewing Operation - JUKI AMS-210E/IP-410 Instruction Manual

(2) sewing operation

Operaton example : Perform sewng wth the contents of the regstered C1.
h
h
d
1. When you desire to return the pattern to the previous one or skip the next pattern
after sewing, press
indication of the pattern will change, and the work clamp feet will move to the sewing
start point.
2. If the contents of P1 to P25 are changed after registration of c1 to c20, the contents
of P1 to P25 used in c1 to c20 will change. so, be careful.
3. Make sure of the contour of the pattern for each of the patterns. (refer to the item
"@-3-2.(2) checking the contour of the sewing pattern"
1) Turn ON the power swtch.
2) Set the pattern No. to "C1-1 " usng the
or
/ 0 / S1 to S999 / 1 to 200 / P1 to P50
3) Press the
lghts up, the work clamp feet wll go up after
havng moved.
4) If the contour of the pattern s acceptable, the
sewng can be made.
5) Every time the sewing is finished, the step is
made n the order of the combnaton. After
completng one cycle of sewng, the step
returns to the first step. The sewing can be
made repeatedly.
or key in a state that the sewing lED lights up. the
– 98 –
key. Scroll as follows :
C1 to C20 , P1 to P50 ,
key. When the sewng LED
p.87.)