Performing Combination Sewing; Selection Of Combination Data - JUKI AMS-210E/IP-410 Instruction Manual

2-22. Performing combination sewing

Frst, change the sewng mode to the combnaton sewng before performng settng.
/ Refer to "@-2-20. changing sewing mode"

(1) selection of combination data

A
E
C
p.61.
1 Display the data input screen.
Only n case of the data nput screen (pnk), t s possble to
select the combnaton data No.
In case of the sewng screen (green), press READY swtch
to dsplay the data nput screen (pnk).
2 call the combination data no. screen.
When COMBINATION DATA NO. button
the combnaton data No. selecton screen s dsplayed. Com-
bnaton data No. whch s selected at present and the con-
tents are dsplayed n the upper part of the screen, and other
combnaton data No. buttons whch have been regstered are
dsplayed n the lower part of the screen.
3 select the combination data no.
When UP/DOWN button
data No. buttons C whch have been regstered are changed
over n order. Here, press the combnaton data No. buttons C
D
you desre to select.
When STEP CONFIRMATION button
the sewng shapes of patterns whch have been regstered n
B
the combnaton data and the lke are changed over n order
and dsplayed.
4 Determine the combination data no.
When ENTER button
data No. selection screen is closed and the selection is fin-
shed.
– 66 –
A s pressed,
B s pressed, combnaton
E s pressed,
D s pressed, the combnaton