Performing Sewing Using The Combination Function; Register Of The Combination - JUKI AMS-210E/IP-410 Instruction Manual

3-8. Performing sewing using the combination function

By arrangng n the order of use of the pattern regster (P1 to P25) whch have been already regstered
and regsterng n C1 to C20, the sewng pattern wll change n the order every tme the sewng machne
finishes the sewing.

(1) register of the combination

Settng example : Combne n the order of P1, P2 and P3, and regster them n the C1.
1) Turn ON the power swtch and press
to enter the mode settng (memory swtch set-
tng).
2) Indcate the combnaton mode wth
key.
3) Press key. Sewng LED lghts up to
enter the combnaton mode.
C1 to C20 can be selected wth
key.
When the space after c1 is blank, the
data is in the registered state. When
the space after c1 is "- -", the data is
not in the registered state.
4) Press key, and then press
P1 is set to the first pattern of C1.
5) Press key, and then press
P2 s set to the second pattern of C1.
6) Press key, and then press
P3 s set to the thrd pattern of C1.
7) Press key to finalize the register.
8) Press key.
Combination register mode is finalized.
9) Press key.
Mode setting is finalized and the mode returns
to the normal mode.
– 97 –
key
or
or
key.
key.
key.