Performing New Register Of Users' Pattern - JUKI AMS-210E/IP-410 Instruction Manual

2-13. Performing new register of users' pattern

A
B
D C
1 Display the data input screen.
Only in case of the data input screen (blue), new register of the
pattern can be performed. In case of the sewing screen (green),
press READY switch
(blue).
2 Call the new register of users' pattern screen.
Press NEW REGISTER button
of users' pattern screen is displayed.
3 Input the users' pattern No.
Input the users' pattern No. you desire to newly register with
the ten keys B . It is possible to retrieve the users' pattern No.
which has not been registered with the + or – button
E
( C and D ).
4 Determine the users' pattern No.
Press ENTER button
NO. to be newly registered and the data input screen at the
time of users' pattern selection is displayed.
When the existing users' pattern No. is inputted and ENTER
button is pressed, the overwriting confirmation screen is dis-
played.
– 50 –
and display the data input screen
A and the new register
E to determine the users' pattern