Preparation Of The Sewing Machine; Lubrication - JUKI AMS-210E/IP-410 Instruction Manual

4. PrEParatIon oF tHE sEWInG MacHInE

4-1. lubrication

WarnInG :
turn oFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
a
B
1. Do not lubricate to the places other than the oil tank and the hook of caution 2 below.
trouble of components will be caused.
2. When using the sewing machine for the first time or after an extended period of dis-
use, use the machine after lubricating a small amount of oil to the hook portion. (refer
to "#-1-2. adjusting the needle-to-shuttle relation"
Check that the place between lower lne B and up-
per lne a is filled with oil. Fill there with oil using
the oler suppled wth the machne as accessores
when ol s short.
The oil tank which is filled with oil
is only for lubricating to the hook
portion. It is possible to reduce
the oil amount when the number
of rotation used is low and the oil
amount in the hook portion is ex-
cessive. (refer to
of oil supplied to the hook" p.126
p.121. )
– 17 –
"#-1-9. amount
.)