3-15. Installing the air hose (Pneumatic type only)
2
3-16. Installing the eye protection cover
WarnInG :
Be sure to attach this cover to protect the eyes from the disperse of needle breakage.
2
1
close
open
1
3
– 16 –
1) Connectng the ar hose
Connect the ar hose to the regulator .
2) Adjustment of ar pressure
Open ar cock 1 , pull up and turn ar adjust-
ment knob 2 and adjust so that ar pressure
ndcates 0.35 to 0.4 MPa (Max. 0.55 MPa).
Then lower the knob and fix it.
* Close ar cock 1 to expel ar.
Use eye protecton cover 1 after securely at-
tachng t on face plate cover 3 wth screw 2 .