Performing Setting Of The Production Control Information - JUKI AMS-210E/IP-410 Instruction Manual

(4) Performing setting of the production control information

1 Display the production control screen.
Dsplay the producton control screen referrng to
"@-2-24.(3) observing the production control information"
p.72.
A
B
C
2 Input the final target value.
Frst, nput the number of peces of the target of producton n
the process to whch sewng s performed from now on. When
final target value button
value nput screen s dsplayed.
Input the value you desre wth ten keys or UP/DOWN buttons.
After the nput, press ENTER button
D
3 Input the pitch time.
Next, nput the ptch tme requred for one process. When
PITCH button
pressed, the ptch tme nput screen s dsplayed.
Input the value you desre wth ten keys or UP/DOWN buttons.
After the nput, press ENTER button
E
4 Input the number of times of thread trimming.
Next, nput the number of tmes of thread trmmng per pro-
cess.
When number of tmes of thread trmmng button
the prevous page s pressed, the number of tmes of thread
trmmng nput screen s dsplayed.
Input the value you desre wth ten keys or UP/DOWN buttons.
After the nput, press ENTER button
* When the input value is "0", count of the number of times
F
of thread trimming is not performed. use this function by
connecting the external switch.
– 74 –
A is pressed, the final target
D .
B of the aforementoned tem 1) s
E .
F .
C n