HP B2355-92068 Administration Manual page 65

amutil(1M)
EXAMPLES
Flash the amber LEDs on all the disks in disk array RACK_51:
amutil -F RACK_51
Stop flashing the amber LEDs on disk array RACK_51:
amutil -s RACK_51
The following example alters the rebuild priority settings. It assigns a value of 5 seconds to the rebuild
command rate, and sets the data block amount to 16 blocks on LUN 4 on disk array RACK_51. This gives
host I/Os higher priority than the default settings.
amutil -R 4 -f 50 -a 16 RACK_51
DEPENDENCIES
must be running to execute this command. See AM60Srvr(1M).
AM60Srvr
AUTHOR
amutil was developed by HP.
SEE ALSO
ammgr(1M), amcfg(1M), amdsp(1M), amlog(1M), AM60Srvr(1M).
HP-UX 11i Version 2: December 2007 Update
− 3 −
Hewlett-Packard Company
amutil(1M)
a
65