HP B2355-92068 Administration Manual page 452

lanadmin(1M)
menu
quit
terse
verbose
LAN Interface Test Mode Menu
The following commands are available:
clear
display
end
menu
ppa
quit
reset
specific
l
Arguments
lanadmin
PPA
WARNINGS
Changes made to an interface's station address or mtu with the
between system reboots. A user must modify the initialization configuration files for this feature, either
manually editing configuration files or through the
AUTHOR
lanadmin
SEE ALSO
netstat(1), lanscan(1M), linkloop(1M), ping(1M), lan(7), vlan(7).
IETF Requests for Comments: RFC 1213, RFC 1398, RFC 2863.
452 Hewlett-Packard Company
Display the Test Selection Mode command menu.
Terminate the
lanadmin
Suppress the display of command menus.
Restore the display of command menus.
Clear the LAN interface network statistics registers to zero. You must have
superuser privileges.
Display the RFC 1213 MIB II statistics. Depending on the link, the type-specific
MIB statistics may also be displayed. For instance, for Ethernet links, the RFC 1398
Ethernet-like statistics are displayed.
Return
lanadmin
Display the LAN Interface Test Mode command menu.
Prompt for a PPA that corresponds to a LAN interface card. It defaults to the first
LAN interface encountered in an internal list. Appropriate values can be displayed
with the
lanscan
Terminate the
lanadmin
Reset the local LAN interface card, causing it to execute its self-test. Local access to
the network is interrupted during execution of
privileges.
Display and execute commands from a driver
recognizes the following Immediate Mode argument.
The Physical Point of Attachment (PPA) number of the LAN interface. This argument
is ignored if none of the
options specified after PPA are ignored. Appropriate values can be displayed with the
command (see lanscan(1M)).
lanscan
was developed by HP.
program.
to Test Selection Mode.
command (see lanscan(1M)).
program.
specific
aAbBcgmMprRsSVxX
lanadmin
interface.
SAM
− 3 −
HP-UX 11i Version 2: December 2007 Update
lanadmin(1M)
. You must have superuser
reset
menu.
options are used (Menu Mode). Any
command will not be preserved