Table of Contents
Advertisement
hpux(1M)
966616+397312+409688 start 0x6c50
Booting To Single User Mode
In this example, the
-i
operation.
ISL> hpux -is
Boot
: disc(8.0.0;0x0)/stand/vmunix
966616+397312+409688 start 0x6c50
(Kernel Startup Messages Omitted)
INIT: Overriding default level with level 's'
INIT: SINGLE USER MODE
WARNING:
YOU ARE SUPERUSER !!
#
Booting With A Modified I/O Configuration
Here, a disc driver is configured in at CIO slot 5, SCSI address 5 as a dump device. Regardless of what was
present in the kernel's original I/O configuration, the driver
Similarly,
is configured in at CIO slot 63 which is to be the console. The only other devices
asio0
configured are the console and root device, which
ISL> hpux -aC asio0(8/0/63) -aD disc(8/16/5.5)
Boot
: disk(8/0/19/0.14.0.0.0.0.0;0)/stand/vmunix
: Adding
console (8.0.63;0)...
: Adding
dump (8.16.5.5;0)...
6463488 + 1101824 + 939616 start 0x39168
(Additional Kernel Startup Messages Omitted)
Displaying The Autoexecute File
In this example,
show autofile
boot LIF, on the device from which
read the
autoexecute
ISL> hpux show autofile
Show autofile
: AUTO file contains (hpux)
Changing The Autoexecute File
This example shows how to change the contents of the
reset, and the new command will be used during any unattended boot.
ISL> hpux set autofile "hpux /stand/myconfig/vmunix"
Set autofile
: disk(2/0/1.3.0.0.0.0.0;0)
: AUTO file now contains "(hpux /stand/myconfig/vmunix)"
Listing Directory Contents
The contents of the directory (
number of links, user id, group id, and size in bytes for each file in the directory. There are three available
kernel configurations to boot: the default configuration (
(
), and one other saved configuration (
backup
ISL> hpux ll /stand
Ls
: disk(2/0/1.3.0.0.0.0.0;0)/stand
dr-xr-xr-x
dr-xr-xr-x
drwxr-xr-x
-rw-r--r--
HP-UX 11i Version 2: December 2007 Update
(PA-RISC Systems Only)
option is used to make the system come up in run-level
boot
is used to print the contents of the
was booted. Optionally, a devicefile can be specified in order to
hpux
file from the boot LIF of another boot device.
/stand
) on the root disk are listed. The format shows the file protections,
good
9 2
2
14 2
2
5 0
3
1 0
3
− 8 −
is now configured at that hardware path.
disc
derived from
pdc
.
autoexecute
file. Once done, the system can be
autoexecute
vmunix
), the automatic backup configuration
). Listing the files over the LAN is not supported.
1024 ./
1024 ../
1024 backup/
19 bootconf
Hewlett-Packard Company
hpux(1M)
, for single user mode of
s
file residing in the
361
h
Advertisement
Table of Contents
