Table of Contents
Advertisement
getx25(1M)
NAME
getx25 - get x25 line
SYNOPSIS
/usr/sbin/getx25
DESCRIPTION
The
commands, including
uucp
below.
is functionally very similar to
getx25
connected to an X.25 PAD. It performs special functions such as setting up an initial PAD configuration. It
also logs the number of the caller in
the PAD being used. HP 2334A is the only one supported at this time. A typical invocation would be:
/usr/sbin/getx25 x25.1 2 HP2334A
WARNINGS
Use of
uucp
commands, including
HP-UX. Use ftp(1) or rcp(1) instead.
AUTHOR
getx25
was developed by HP.
SEE ALSO
login(1), uucp(1), getty(1M).
HP-UX 11i Version 2: December 2007 Update
(TO BE OBSOLETED)
line
speed pad-type
, are targeted for removal from HP-UX; see the WARNINGS
getx25
(see getty(1M)) but is used only for incoming lines that are
getty
/var/uucp/.Log/LOGX25
getx25
, is discouraged because they are targeted for removal from
− 1 −
getx25(1M)
. The third parameter is the name of
Hewlett-Packard Company
g
339
Advertisement
Table of Contents
